⏱ 8 min read  ·  ✅ Updated Nov 2026

A bench scraper is one of the cheapest tools in a baker’s kit and one of the most used. It divides dough into even pieces, lifts sticky dough off the counter, shapes loaves during pre-shaping, and leaves the bench clean in a few swipes. A flexible bowl scraper does the same job inside a mixing bowl, where a rigid blade cannot reach, and it saves dough that would otherwise wash down the sink.

Bench scrapers appear on this site only as single picks inside gadget guides: once as a standalone tool in a weekend bakers guide, once as an accessory with a pastry mat in a home bakers guide, and once bundled with a pizza stone. The site has no dedicated dough scraper roundup. This guide fills that gap with five standalone scrapers: three rigid stainless bench scrapers and two flexible bowl scrapers, each with its own strengths and limits.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

For most home bakers, the OXO Good Grips scraper is the simplest choice: a stiff stainless blade, a comfortable grip, and dishwasher-safe care. The Dexter-Russell Sani-Safe suits bakers who want a sealed, NSF-certified handle. The Ateco 1303 set covers bowl work, the Winco DSC-3 is the budget metal pick, and the Matfer Bourgeat bowl scraper is the sturdiest plastic option.

The 5 Best Dough Scrapers

OXO Good Grips Stainless Steel Multi-Purpose Scraper & Chopper

The OXO Good Grips Multi-Purpose Scraper & Chopper is the scraper most home bakers should buy first. Serious Eats named it its favorite bench scraper, and it is a long-running Wirecutter favorite. The stainless blade is stiff enough to cut a large mass of sourdough into clean pieces in one press, and the slightly beveled edge slides under sticky dough and flour paste without gouging a wood counter. The blade carries inch markings, so a baker can divide dough into equal pieces without reaching for a ruler.

The rounded, rubberized handle is the reason most owners keep it: it stays put in wet, floury hands and gives leverage during pre-shaping. The scraper is dishwasher safe, which matters after a messy baking session, and it doubles as a chopper for vegetables and a scoop for moving chopped ingredients into a pan. What does not fit: the printed markings are low-contrast and hard to read on a floury bench, and dough can collect at the seam where the blade meets the handle.

Spec Detail
Blade Stainless steel
Blade size Not stated
Markings Inch markings along the blade
Handle Soft, non-slip rubberized grip
Dishwasher safe Yes

Check price on Amazon

Check price on Amazon

Check price on Amazon

Check price on Amazon

Check price on Amazon

Dexter-Russell Sani-Safe 6″ x 3″ Dough Cutter & Scraper

The Dexter-Russell Sani-Safe is the scraper found in restaurant and bakery kitchens, and the pick for bakers who want a sealed handle. Its 6 by 3 inch stainless blade is set into a textured white polypropylene handle with no gap for dough or water to work into, and the maker certifies it to NSF standards and makes it in the United States. That sealed construction matters for cottage bakeries and anyone baking in a licensed kitchen.

The blade is a little shorter and flatter than the OXO, so it cuts very soft dough a touch less crisply, and it has no measurement markings. Dexter-Russell recommends hand washing Sani-Safe cutlery to keep it looking new. What does not fit: bakers who portion by the markings on the blade should look elsewhere, and anyone who wants a dishwasher-safe tool should pick the OXO instead.

Spec Detail
Blade Stainless steel, 6 x 3 in
Handle White polypropylene, sealed to blade
Certification NSF certified
Made in United States
Markings None
Dishwasher safe No, hand wash recommended

Ateco 1303 Plastic Bowl Scraper Set, 6 Pieces

A metal bench scraper cannot get dough out of a bowl. A flexible plastic bowl scraper can, and the Ateco 1303 set gives a baker six of them for the cost of one metal scraper. Each scraper is about 5.3 by 3.6 inches, made of flexible food-safe polyethylene, with one curved edge that follows the bowl wall and one straight edge for flat surfaces and for cutting soft dough.

The scrapers are flexible enough to clear the curve of a mixing bowl in one pass, yet stiff enough to fold and turn dough during bulk fermentation. They are dishwasher safe, so a baker can keep one in every drawer and one by the mixer. What does not fit: thin plastic nicks if it meets a knife edge and warps on a hot pan, and the set is too soft to portion stiff dough, so it works best as a partner to a metal bench scraper rather than a replacement.

Spec Detail
Material Flexible food-safe polyethylene
Size About 5.3 x 3.6 in each
Edges One curved, one straight
Count 6 scrapers
Dishwasher safe Yes

Winco DSC-3 Stainless Steel Dough Scraper with Wood Handle

The Winco DSC-3 is the basic restaurant-supply scraper, and the cheapest honest version of the tool in this guide. A rigid 6 by 3 inch stainless blade is riveted to a simple wood handle, and it cuts dough, scrapes the counter, and moves chopped vegetables as well as scrapers that cost three or four times as much. For a baker buying a first scraper, or a second one for the pizza station, it is hard to beat.

The compromises are easy to spot. There are no measurement marks, and the blade edges can feel sharp out of the box. The listing calls the scraper dishwasher safe, but repeated dishwasher cycles dry out and crack the wood handle, so hand wash it and oil the handle now and then. What does not fit: bakers who want markings on the blade or a handle that can go in the dishwasher should spend more on the OXO.

Spec Detail
Blade Stainless steel, 6 x 3 in
Handle Riveted wood
Markings None
Dishwasher safe No, hand wash recommended for wood

Matfer Bourgeat Flexible Bowl Scraper

The Matfer Bourgeat bowl scraper is one well-made bowl scraper instead of a stack of thin ones. It is thicker than the Ateco scrapers and holds its shape better, so a baker can press firmly against a bowl or bench without the edge folding. The curved side clears bowls, the straight side works as a mini bench scraper for soft dough, and the maker builds it in France for professional pastry kitchens.

The trade-off is cost: one Matfer scraper costs about as much as the six-piece Ateco set, and plastic is still plastic, so it nicks if it meets a knife. What does not fit: bakers who want spares in every drawer should buy the Ateco set instead, and anyone who needs to portion stiff dough still needs a metal bench scraper alongside it.

Spec Detail
Material Flexible food-safe plastic
Edges One curved, one straight
Made in France
Count 1 scraper
Dishwasher safe No, hand wash recommended

How to Choose

Match the scraper to the job first. A rigid metal bench scraper divides and shapes dough on the counter and scrapes the bench clean. A flexible bowl scraper clears dough from the inside of a bowl and folds dough during fermentation. Most bread bakers end up wanting one of each, which is why this guide mixes both types.

Check the blade next. A 6 by 3 inch blade suits most home baking: wide enough to divide a loaf in one cut and to scrape a counter in a few passes, yet small enough to control with one hand. Measurement marks along the blade help divide dough into equal pieces without a ruler. A beveled edge slides under sticky dough more cleanly than a square edge.

Look at the handle and the care rules. A sealed handle keeps dough and water out of the joint. A wood handle needs hand washing and occasional oiling, and a dishwasher-safe scraper saves time after a messy session. A single-piece metal scraper has no seam at all, so nothing can loosen or trap dough.

Who Should Skip It

Not every baker needs a dedicated scraper. If a baker works only with no-knead dough in a single bowl, a flexible bowl scraper alone may be enough, and a metal bench scraper adds little. Cooks who never bake bread or pastry can skip this guide entirely: a chef knife and a spatula cover the same chopping and scooping jobs in everyday cooking.

Bakers who already own a bench scraper they like have little to gain here unless the old one has a loose handle, a rusted blade, or an edge that no longer cuts cleanly. The same applies to owners of a silicone baking mat: use a plastic scraper on the mat, never a metal blade, because metal can cut the surface.

FAQ

Can I use a metal bench scraper on a silicone baking mat?

No. A metal blade can cut or score a silicone mat, which shortens its life and can leave loose pieces in food. Use a flexible plastic bowl scraper on a mat, and save the metal bench scraper for wood, stone, or laminate counters.

Do I need both a bench scraper and a bowl scraper?

Most bread bakers end up with one of each. The bench scraper divides, shapes, and cleans the counter, while the bowl scraper clears dough from the bowl and folds it during fermentation. A baker who mixes only in a bowl can manage with the bowl scraper alone, but the pair covers every step.

How do I clean a bench scraper with a wood handle?

Hand wash it with mild soap, rinse, and dry it fully right away. Do not leave it in the dishwasher or submerged in a sink, because repeated soaking dries out and cracks the wood. Rub a little food-safe oil into the handle now and then to keep it from drying out.

What size bench scraper should I buy?

A 6 by 3 inch blade suits most home baking: wide enough to divide a loaf in one cut and to scrape a counter in a few passes, yet small enough to control with one hand. Larger blades cover more counter but feel clumsy in small bowls, while smaller blades take more passes on a big batch.

Final Verdict

The right scraper follows the baking a cook does most. Most home bakers should take the OXO Good Grips scraper for its stiff blade, comfortable grip, and dishwasher-safe care. Bakers who sell bread or bake in a licensed kitchen should take the Dexter-Russell Sani-Safe for its sealed, NSF-certified handle. The Ateco 1303 set is the practical bowl-scraper buy, the Winco DSC-3 is the budget metal pick, and the Matfer Bourgeat is the one bowl scraper to buy if only one is needed. Whichever is chosen, match the blade to the job and keep the edge clean.